Optical fiber laser detector BG-TLD

Fiber laser detector is a new generation of high-power laser detector developed by our factory. It is especially aimed at the harsh working sites of the metallurgical industry, and uses a high-power semiconductor infrared laser tube with a laser peak power of 60W as the emission source, so it has a strong penetrating ability and a long operating distance.

Fiber laser detectors have the following characteristics:

1. Il peut fonctionner dans des environnements difficiles (tels que la température élevée, humidité, brouillard d’eau, poussière et autres environnements difficiles).

2. Il peut fonctionner en continu et de manière fiable pendant une longue période.

3. The detector separates the optical unit and the control unit, and the optical unit can be installed in high temperature and harsh environments.

 

 

 

 

 

 

 

 

 

 

 

 

Technical parameters:

1. Detection area (distance between transmission and reception): ≤ 100m；

2. Emission light source: Infrared semiconductor laser with a wavelength of 905nm;

3. Peak power of transmission output: 60W;

4. Laser safety level: CLASS IIIb；

5. Output:

L transmitter: When the transmitter is working normally, the relay is disconnected; When the transmitter is working abnormally, the relay closes. Maximum load capacity DC30V/10A, 250VAC/10A

Receiver: A set of push-pull level outputs with a maximum load capacity of 100mA, equipped with overload protection and short circuit protection. The output polarity can be switched through an internal toggle switch with a response time of 10ms.

A set of relay outputs: response time of 20ms, maximum load capacity of DC30V/10A, 250VAC/10A

Optional energy receiving alarm output: MOS relay output, maximum load capacity DC60V/2.5A. When the received energy is ≤ 20, the MOS relay closes

6. Environmental temperature range:- 25℃~70℃

7. Optical unit:- 25℃~200℃

8. Power consumption: transmitter 5W; Receiver no-load power consumption 5W, full load power consumption 15W

9. Anti environmental light drying: 10000LUX, suitable for detecting objects below 1200 ℃.